Independent electric strike controller

Product description (expand / collapse)

The ASR64P controller is a device that is an element of access control to rooms and facilities. It cooperates, for example, with a bolt or an electromagnetic striker installed in the entrance door to the room. It supports contactless, proximity identifiers (UNIQUE standard) – the same ones used in the RCP X8 system. It does not log events. Up to 1000 identifier codes can be entered into the controller’s non-volatile memory. Configuration operation by means of a Master card.

Technical data (expand / collapse)

Supply voltage: 12-15V DC
Current consumption: 40mA + lock current
Working temperature: from -25°C to +55°C
Relative humidity: up to 80% at 40°C
Relay contacts load: 230V/5A
Relay holding: from 1 sec. to 30 sec.
Max number of transponders in the memory: 1000
Type of supported transponders: 125 kHz UNIQUE
Dimensions: 106 x 54 x 21 mm (without wires)
Dimensions: 105 x 63 x 17 mm
Weight: approx. 110g

Construction (expand / collapse)

The ASR64P controller is implemented as an electronic module assembled on one laminate. The module, housed in a one-half, flat plastic housing, is varnished to withstand the effects of weathering. Five wires are led out from the module, through which the module is powered and controls the electromagnetic tap (insulated relay contacts). The ASR64P controller is delivered with approximately 0.4 m long connection cables. This allows the controller to be installed, e.g. outside the building, and the connection is made inside after drilling a hole through the wall. The connection can also be made within the plastic housing of the controller, shortening the factory wires and using a maximum of 1.5 mm2 for connecting individual cubes.